Solar And Wind Trainer Machinery (Spec) 1

Solar And Wind Trainer Machinery (Spec) 1

(5) Fan technical

Fan type :  horizontal  direction toward
Start speed :  2,5 meters/second
Rated  fan speed :  10 meters/second
Maximum anti wind speed :  40meter/second
Rated work power :  200-500W
Wind direction adjust :  auto adjust

(6) Battery technical specification:

Voltage :  12V
volume :  40Ah
Battery  :  lost electricity:10V±1V
executive  standard :  GB/T 9535
Relative humidity : 35-85%RH(Non-condensate)
(7) Work condition :

Temperature -10~-+40°C              Temperature ≤80°C
Environment air .  no corroslvity air, no fuel air, no large quantity OF  CONDUCTIVE DUST
(8) Power   
Consumption  : ≤5000W,
Work power : AC220±5%,DC24V
supply power , single phase there wires AC220±5%,50HZ

Work mode : continuous

3 system introduction

This system can be divided to four part: wind generating electricity system , photovoltaic  power generation system , control system, inverter system. Wind generating electricity system consist of light source, photovoltaic   cell plate, battery . Control system consist of wind and solar complementary. Inverter system is made of frequency inverter and load unit.

1. Simulate wind generating electricity set : this system select horizontal axis magnet synchronous generator, use tan to simulate wind, though adjust fan position to change wind strength and direction, to test generator effect in the same condition.

2. Simulator photovoltaic power generation system: this system use 4 places of 30W solar energy board, you can connect in serles or in parallel according to different system pressure. Simulate solar light set consist or two metal halide, It can adjust the relative position with photovoltaic plate, to simulate solar light position, and demonstration.

3. Battery group: it consist or 4 pieces 12V4DAH seal battery group, you can parallel connect use as 12V4DAH system, you can also connect in series as 24V/10QAH system, and deep understand battery .

4. Controller hanging box: this hanging box use industrial type changer controller, it can control wind generator and photovoltaic generator to change on battery , with LCD display  board, you can check system technical parameter and can set by yourselves. It us with prevent over change, over current

5.inverter hanging box: adopt 12V/24V voltage intelligent recognize frequency inverter, output voltagels  AC220V, continuously work power  is 600W, peak work power is 1000W. Rotary efficiency>90%,low voltage automatic alarm.

6. Meter box: is display generation current, charge voltage charge current, Inverter voltage, Inverter current in real time.

7. Terminal load hanging box: it contains incandescent light bulb, energy saving and axle fan ,for load test 220V AC current from inverter .