FERRITE STEELS FALLING SAMPLE GAS SAMPLING

Usage and Characteristics

This machine is aspecialized equipment with the advanced domestic technology level, which was based on the actual needs of  customers in accordance with the  GB T8363 -2007< metallicmaterials, drop-weight tear test of ferritic steels> of the gap. With the hydraulic loading, this machine can form a gap once and also can run steadly whenmaking the specimen gap. it uses single - chip controlled technology, the operation is simple and can control accurately. the press sword has along service life, every knife can make  thousands of samples.

MAIN Technical Parameter

1. Max pressure load                    : 2000 kN

2. Height of compressive space    : 360mm

3. Angle of opening                      : 45 _ 2

4. Depth of opening                      : 5 _ 0.5mm

5. Bottom of opening R                 : 0.025

6. Load mode                                : Hydraulic pressure to load

7. Power                                        : - 380V 50Hz 3kW

MAIN Technical Parameter

1. Coaxial tolerance of the two chuck             : <   0.4

2. Straightness of removal guide rail

     within the length scope                               : < 0.2mm

3. Maximum distance of two chuck                 : no less than 550mm

4. Revolution speed                                         : 30 r/min & 60 r/min

5. Hardness of clamp mouth                            : HRC 55 - 65

6. Weight tolerance                                          : _ 0.01%

7. Working noise of tester                                : < 70db

8. Environment and working conditions                      :

            a. Temperature                                     : 10C -35C

            b. Place in stable  basis, the levelness : <0.2 %

            c. Place in no vibration environment

            d. No corrosive medium arround

           e. Power                                                              : - 380V  50Hz  2kW