Automated Cold Cranking Simulator (CCS)

Overview

HK-6538A automated cold cranking simulator (CCS) viscosity apparatus conforms to ASTM 5293 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between -5 and -35°C Using Cold-Cranking simulator, which used for determining apparent viscosity of engine oils and base stocks by cold cranking simulator (CCS) at temperature between -5 and -35°C at shear stresses of approximately 900 to 25 000 mPa.s The range of an instruments id dependent on the instrument model and software version installed. Apparent cranking viscosity results by this method are related to engine-cranking characteristics of engine oils.

Features

·        We user retro reflector to observe the experimental phenomenon.

·        Total English version operation interface.

·        Omron temperature can detect rotary speed automatically, use fine tuning knob to control current reduce much manual operation error.

·        Equipped with double imported compressor as cooling system, refrigeration depth can reach -60áµ’C

·        The apparatus is equipped with imported click drive with good precision.

·        It can print and store test result.

·        Second generation rotor, low torque testing condition with high repeatability.

·        The apparatus will automatically shut to heat after each experiment, this function is good for rapid olean.

·        The apparatus recommends refrigeration speed automatically.

Technical Parameters

·         Rated Voltage : AC220V±20%

·         Power : <2.5KW

·         Temperature Range : external circulated alcohol bath temperature control range ~-60áµ’C

·         Cooling Bath Temperature Accuracy : ±0.1áµ’C

·         Stator temperature accuracy : ±0.02áµ’C

·         Viscosity Measuring Range : 1500~27000mPa.s

·         Ambient Requirements : Temperature 10~40áµ’C; Humidity <85%